MDR-40W Din Rail Power Supply 48V,0.83A
Specifications
| DC VOLTAGE | 48V |
| RATED CURRENT | 0.83A |
| CURRENT RANGE | 0 ~ 0.83A |
| RATED POWER | 39.8W |
| RIPPLE & NOISE (max.) Note.2 | 200mVp-p |
| VOLTAGE ADJ. RANGE | 48 - 56V |
| VOLTAGE TOLERANCE Note.3 | ±1.0% |
| LINE REGULATION | ±1.0% |
| LOAD REGULATION | ±1.0% |
| SETUP, RISE TIME Note.5 | 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load |
| HOLD UP TIME (Typ.) | 50ms/230VAC 20ms/115VAC at full load |
| VOLTAGE RANGE | 85 ~ 264VAC 120-370VDC |
| FREQUENCY RANGE | 47~63Hz |
| EFFICIENCY (Typ.) | 88% |
| AC CURRENT (Typ.) | 1.1 A/115 VAC 0.7A/230VAC |
| INRUSH CURRENT (Typ.) | COLD START 30A/115VAC,60A/230VAC |
| LEAKAGE CURRENT | <1mA/240VAC |
| OVERLOAD | 105 ~ 150% rated output power Protection type: Constant current limiting, recovers automatically after fault condition is removed |
| OVERVOLTAGE | 57.6-64.8V Protection type : Shut down o/p voltage, re-power on to recover |
| DC OK SIGNAL | Relay contact rating{max.): 30V/1A resistive |
| WORKING TEMP. | -20 ~ +70“C (Refer to "Derating Curve") |
| WORKING HUMIDITY | 20 - 90% RH non-condensing |
| STORAGE TEMP, HUMIDITY | -40 ~ +85°C, 10 ~ 95% RH |
| TEMP. COEFFICIENT | ±0.03%/°C (0 ~50°C) |
| VIBRATION | Component: 10 - 500Hz, 2G 10min./1 cycle, period for60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 |
In Stock: 0.0
| Stock: | 0.0 Can Dispatch Immediately |
| Factory Lead Time: | 15 Days |
| Price: |
₹ 1.00 ₹ 1.00₹ 1.00 |